******
- Verified Buyer
My girlfriend and I both have opposite sides of this desk and have been thrilled with how they have fit in and improved our setups at home. Each side fits right up against the other and makes it look really nice. They have plenty of space side to side and front to back, able to fit my TV, my UltraWide monitor, and my normal monitor all on one desk. They sit nicely and haven't shown any sign of wobbling. The desk even comes with a nice large mousepad to add to your setup.I really liked this one, as it is my 3rd table, and I have no qualms about itAdded a few upgrades like diffused lighting and double sided taped a surge protector to the bottom. Added a cable management system to the bottom as well. Doesn't wabble, material is sturdy enough to use a force feed back steering wheel with out worry. Overall very happy67.15 lbs. gross weight and 54.61 lbs. net weight stamped on box. Shipment label says 45lbs. box weight. I didn't weigh this, but felt closer to the 67 lbs. when loading/unloading from post office to car to house. Box dimensions are 47 inches long by 26.25 inches wide by 6 inches tall (for those of you with small cars or cars where back seat folds down through trunk). Box appeared to be of sturdy construction and there are a few layers of thin cardboard and thin styrofoam inside to protect the table tops from the metal legs and metal frame and brackets/screws. Unfortunately even though the exterior of the box was not damaged, the metal frame that screws to the bottom of the table top still gouged the right table top. The gouge is .75 inches long by .25 inches wide and .25 inches deep. The left table top had several small surface scratches closer to the edge where the two tabletops meet that will not buff out. If there were no blemishes, this would be a 4.5+ star review. Since the internal packaging is inadequate, this is a 2.5 star review. Assembly is very straightforward and fast and simple. There is an Allen wrench included and I ended up with two spare/extra screws, which is always nice, just in case. Screw everything together "finger tight" and then flip upright onto the legs/feet (a helper is beneficial but not necessary) and then tighten everything with the Allen wrench. *Note: do not overtighten, because like most manufactured wood, you will probably break/crack the wood if you crank down too hard; let the items on top add the weight/stability and then just tighten everything enough to not wobble or wobble loose. If you have a water level to make sure the top is level, you can use this. I'll wait until everything is on top (printer, full size computer tower, keyboard, mouse, and monitor) and recheck level when I set this up this weekend. The quality of the metal pieces is above average with relatively nice powder coating, and the adjustable round "feet" have a larger circumference/footprint to provide some extra stability and are adjustable to make the table tops level with the ground. One set of threads on one of the leg bottoms where the foot screws into was tight and required a good bit of extra effort to thread the foot (I tried all four feet, and verified the threads on the leg bottom were the issue); the foot did not crossthread, as far as I can tell. Overall the desk is of slightly above average quality for the price, and the wider circumference feet are a welcome addition for more stability. Could this desk cost $80 less? Sure, but we needed/wanted this size, so you pay for what you want/need... The included wire routing holes have a spring mechanism that allows you to twist the small "porthole" cover to open or closed, so you can install both and keep them closed or open (no permanent open hole like on most other desk wire routing covers). The included mousepad/mat is VERY large and of average quality but fits exact to the depth of the desk on the longer side. The logo is a large scorpion, which may not be everyone's thing, but if it's covered by a keyboard and mouse you won't see it anyways. We will either use the mousepad/mat to place the computer tower on in the corner of the desk to protect the desk surface, or keep it towards the edge on the longer side and use as a mousepad. In either location, the mousepad/mat will cover the seam from the two tabletop surfaces. Since the tabletop arrived scratched and gouged, we will *probably* keep the computer tower in the corner and have the mousepad towards the opposite edge to use for the keyboard, mouse, and monitor, while also covering the unsightly gouge and most of the scratches in the manufactured wood tabletop. I ordered the black desk, so a black permanent marker filled in the discoloration (white and brown discoloration, since this tabletop is made of manufactured "was-wood"), but we still know it's there, which is never welcome on a $181+ new purchase. I don't have time to wait to swap out the item, but if you are patient, the "return" options are to receive a replacement product and then send back the original (just make sure everything is good to go and you don't overlook anything and are stuck with more/different blemished/broken pieces), or to receive a refund after sending back the original and not receiving a replacement. I'm opting to keep what I have and maybe the seller will read this and make an offer to at least send out the one longer right side tabletop that has the gouge in it and I will then adjust the stars ratings/review accordingly. The primary reason for purchasing this specific desk were the size (the ~43 inch wide side is perfect for where the desk needs to go and we don't want/need a hutch/shelf above the desk which usually just collects trinkets and dust since they're so narrow) and the above average reviews. There are multiple sellers/manufacturers selling this identical *made in China* desk, so pick the best price and color you want. Just a tip: black color goes with just about anything with any decor/wall color, and will go with more things in the future, and is easier to fix if you have blemishes. If I can add pictures after-the-fact, I will add some of the completed setup with printer, computer, etc. all on the desk. If you made it this far, thank you for reading, and I hope you have a good rest of the day/night.This desk was super easy to put together, every piece lined up exactly where it was supposed to, and is extremely sturdy. My PC weighs at least 70-80 pounds, and it's still holding up like a champ.Nice desk quality and heavy duty. Easy to assemble not issues.The desk was easy to put together and is really sturdy.Right, so first off the box came slightly mishandled from FedEx but that is to be expected. Assembly was not too difficult but there are a lot of hexbit screws and some screws that dig into the wood (one of which stripped the wood but that could be on my part. They include a Phillips which is nice. The two pieces for the tabletop are tricky due to them being held together by only two plates, but the frame itself supports it well enough. The sad bit is that the cable holes and the covers are a bit too small for power cable ends to thread through, so I recommend at least not using the covers. The actual brand that makes them is Designa, not Eureka. After some careful twists and turns, the desk fit perfectly into the corner I designated in my small room (partly because I made sure dimensions were just right before purchasing). Luckily, the mouse mat that they include is pretty good at covering the tabletop intersections. Overall not a bad desk for the cost. Not for people who want something too extravagant. It’s okay IMO. Thank you for coming to my TED Talk. :)Manufactured defect found. Holes in table and iron frame are not matching.When I opened the package, I immediately saw that the small iron frame is pretty straight but the bigger one is a bit off in certain angle and length. I thought maybe it is required in that way but then when I started assembling the table I can see that in the small table side the screws straight away went into holes as they are perfectly aligned.On the other end, in the bigger table side, the frame is only aligning with one hole and rest three are off, hence, I couldn't complete the assembly.I tried for choosing replacement but I only got refund option available as the product is currently out of stock. Also, they are expecting me to mail/courier the product to their shared address and only then they will proceed with the refund process. Amazon always delivers at home and pick it back up for replacement/refund from home which is the least expected since we have received a faulty product. The is unexpectedly poor service from both amazon and the seller astrix inc.The 'L' shaped desk from EE EUREKA ERGONOMIC is what I was looking for.It is easy to assemble, just follow as per the instruction given in the leaflet; even video is available in Youtube, so it is not an issue.This table is one of the best table to invest upon.The assembly is very simple and the provided instructions are very neat and easy. It took only 15 mins to assemble. In addition the provided screws and drivers aided in quick installation. With regards to usage the table is sturdy, light weight and very spacious. Can handle 2 laptops, 1 printer and 2 laptop stands. We have space for big monitor placement as well. The width is sufficient. The biggg mouse pad is crazy useful. Overall a very good investment.Table is really good. Had neck and back ache because of bad posture. Was using old wooden table.This table is actually a worksetup table qhich we have in our IT offices. Using it more than a month now and now posture is correct so no more any back issues.Table height is also good. It's firm and strong. It's perfect for wfh, if you want a good work setup for wfh.
